HIKVISION SWITCH HUB 8 PORT FAST ETHERNET SMART POE SWITCH (DS-3E1310HP-EI)

SWITCH HIKVISION SWITCH HUB 8 PORT FAST ETHERNET SMART POE SWITCH (DS-3E1310HP-EI)

(#SYN0232407081331)

• 8x 100 Mbps PoE RJ45 ports

• 2x gigabit network RJ45 ports

• ShellMetal material, IP40
• Net Weight0.550 kg (1.21 lb)
• Gross Weight0.950 kg (2.09 lb)
• Dimensions (W × H × D)217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
• Operating Temperature0 °C to 40 °C (0 °F to 104 °F)
• Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity5% to 95% (no condensation)
• Relative Humidity5% to 95% (no condensation)
• Power Supply54 VDC, 2.22 A
• Installation ModeDesk-Mounted,Wall-Mounted
• Max. Power Consumption120 W
• Power Consumption In Idle4 W
• Surge Protection6 KV

Network Parameters

• ท่าเรือ8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
• MAC Address Table16 K
• Switching Capacity9.2 Gbps
• Packet Forwarding Rate6.84 Mpps
• Internal Cache4 Mbits

PoE Power Supp​ly

• PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
• PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE PortHi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
• Max. Port PowerPort 1 to 2：90 W Ports 3 to 8：30 W
• PoE Power Budget110 W

Software Function

• Long Range
• Ports 1 to 8: up to 300 m.
• Long range performance may vary depend on camera model or cable condition.
• PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
• HPP
• Support one-click activation and remote management via Hik-Partner Pro.
• Functions supported:
• 1. Display the port rate.
• 2. Display the port bandwidth utilization rate.
• 3. Display the PoE power usage.
• 4. Display topology information.
• 5. Display the alarm status.
• 6. Restart ports and devices.
• 7. Enable port long-rage mode.
• 8. Remotely upgrade the device.
• System Maintenance

• Support device management via web.
• Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
• Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
• Support management via Hik-Central Pro.
• Support remote management via Hik-Partner Pro.
• Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
• Supports 802.1ab LLDP for peer device discovery.
• Support SNMP v1/v2c for third-party management platform access.
• Support port mirroring for fault locating.

Approval

• EMC
• FCC (47 CFR Part 15, Subpart B);
• CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);
• IC (ICES-003: Issue 6);
• RCM (ASNZS CISPR 32: 2015)
• Safety
• UL (UL 60950-1);
• CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);
• CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
• Chemistry
• CE-RoHS (201165EU);
• WEEE (201219EU);
• Reach (Regulation (EC) No.19072006)